Shopping Cart | Wish List |  Your Account  

   Login  
You have 0 item(s) in your Shopping Cart  
Home | Communication Trailers | Solutions | About | News | 1-800-608-0911
 
Product Search
 
 Products and Services


 Help & Info

For help and support contact us at 407-888-9031, Option 2

 
Now In: Vehicle Satellite → TracStar MVS1200P2

Click here to view larger image

Show Picture 1Show Picture 2

Click here to view larger image

TracStar MVS1200P2

 E-mail this product to a friend


     

The TracStar1200P2-2 is a 1.2M antenna with a 2 piece reflector which provides a dual ruggedized case solution for the pedestal assembly and the reflector/boom/feed assembly. The TracStar1200P2 assembles in less than ten minutes. The pedestal and reflector cases have handles and wheels built in for ease of movement. Couple with an optional shock-mounted transportable equipment rack for the modem, antenna controller and additional video or VoIP equipment. 100’ IFL (30.48m) cable is standard.

The MVS Series from TracStar allows personnel with little or no satellite experience to operate mobile Very Small Aperture Terminal (VSAT) satellite communications equipment, enabling the user to access any broadband application over satellite.

The MVS Series of antennas are typically owned and operated by:

  • Corporations with remote or mobile office and monitoring applications
  • Federal, State and Public Safety agencies for law enforcement, emergency response and homeland security communications
  • Military rapid deployment, SATCOM on the pause applications

With TracStar’s MVS Series antennas, users enjoy the same reliable, secure, high-speed IP based data communications they are accustomed to in the office, while mobile. Users can get connected Anywhere/Anytime for applications such as:

  • Secure, high-speed digital communications
  • High-speed internet access
  • Voice and FAX communications
  • Teleconferencing
  • Wide area private network extension
  • Video broadcasting

TracStar antennas feature:

  • Single button push for automatic satellite acquisition
  • Rapid deployment and operation on every Ku-band satellite, worldwide
  • Works with every satellite modem

Eliminates the need for:

  • Leveling the antenna up to 10 degrees
  • Special test equipment for alignment
  • Computers or peripheral equipment to operate the antenna
  • Phone calls to network operators or service providers



Specifications



Reflector

Reflector 1.2 Meter Prime Focus Offset

Mount Geometry Elevation over Azimuth

Polarization Rotation of Feed

Reflector Material Glass Reinforced Plastics

Travel

Azimuth 400° or ±200° from Stow Position

Elevation 0-65° of reflector boresight

Polarization ±95°

Travel Velocity

Slewing/Deploying 2°/second

Peaking 5°/second

Manual Jog 1.0° or –.0.2° / second

Manual Drive Handcrank on Az and El Axii

Electrical Interface

RF 75

Ω Tx / Rx Type F Connector (50Ω option)

Waveguide Grove Flexible Waveguide from Feed

Interfacility Link 32ft (9.75M) Control Cable and Twin RG6 Coax

Motors 24V DC Variable Speed, Constant Torque

Controller & Power Supply 50/60 Hz, 110/220VAC, Single Phase

Power Consumption—Motors Active 250 Watts

Power Consumption—Motors Idle 30 Watts

Antenna Characteristics

Receive

Transmit

Frequency (GHz)

10.95-12.75 13.75-14.5

Gain (Midband)

42.0 dBi 43.2 dBi

VSWR

1.30:1 1.30:1

Beamwidth (degrees)

-3 dB

1.4 1.2

-10 dB

2.5 2.1

First Sidelobe Level (Typical)

-19 dB

-22 dB

Antenna Noise Temperature

30° K at 30° Elevation

Polarization Linear Orthogonal Standard, Optional Co-pol

Radiation Pattern Compliance FCC §25.209, ITU-R S-580-6

Power Handling Capability

40 Watts

Feed Port Isolation – TX to RX75 dB

Controller

One-button operation automatic satellite acquisition with integrated GPS/Compass/Level

Sensors and user configurable satellite selection.

Mechanical

Az/El Drive System Patented Roto-Lok

® Cable Drive System

Polarization Drive System Stainless Steel Chain Drive

Weights and Measures (With 4W Buc and LNB)

Pedestal Case Dimensions : 44W x 27D x 20H in (111.75 x 68.58 x 50.8 cm)
Approximate Weight : 190 lbs (86.18 kg)

Reflector Case Dimensions : 55W x 17D x 31H in (139.7 x 43.17 x 78.74 cm)
Approximate Weight w/IFL Cables : 120 lbs (54.43 kg)

 

Portable Power Supply/Display Unit

Weight - Power Supply ( CE Approved) 4.5 lbs (2.04 kg).

Display Unit 0.5 lbs. (0.22kg)

Power Supply 9”Wx 10.25”Dx2.5”H (22.86 x 26 x 6.35 cm

Display Unit 5 ½”W x 3 ¼”D x 1-3/8”H (13.96 x 8.25 x 3.45 cm)

Rack Mount (1RU)

Weight 4.5 lbs. (2.04 kg)

Dimensions 19.0”W x 8.0”D x 1.75”H (48.26 x 20.32 x 4.44 cm)

Environmental

Wind

Survival

Stowed 100 mph (161 kph)

Operational 60 mph (96.6 kph)

Temperature

Operational -20°F to 125°F

Storage -30° to 140°F


Related Products

MVS1200, MVS1200P4

Prices and Specifications Subject to Change Without Notice.


Regular Price: $32,967.00
 On Sale For: $29,970.00


Quantity: